CAN SCRUBBER - CAPACITY 425 LITRES

Product Details

Price

Rs. 2

City

RAJAHMUNDRY

Payment Mode

Any

Categories

Machinery, Electrical Eq. & Electronics>Pumps, Fans & Air Compressors>Centrifugal Pumps Machinery, Electrical Eq. & Electronics>Food & Brewery Machinery>Confectionery Making Machinery Machinery, Electrical Eq. & Electronics>Agricultural & Dairy Machinery>Dairy Machinery Machinery, Electrical Eq. & Electronics>Food & Brewery Machinery>Food Processing Machinery Machinery, Electrical Eq. & Electronics>Taps, Cocks & Valves>Industrial Valves Machinery, Electrical Eq. & Electronics>Agricultural & Dairy Machinery>Other Agricultural & Dairy Machinery

Minimum Order

1

Samples Available

no

Product status

New

Company Details

Company Name

SWASTIK ENTERPRISES

Contact person

Kanakraj Jain

Phone

91-883-2463658

Fax

91-883-2463659

Address Line1

89-18-50,HINDUSTAN COMPOUND,MORAMPUDI

Address Line2

MORAMPUDI JUNCTION

City

RAJAHMUNDRY

State

ANDHRAPRADESH

Country

India

Zip/Postal Code

533103

Fax

91-883-2463659

Email

Click to send Email

• 
• 
• 
• 

Description

1.0 FUNCTIONAL REQUIREMENNTS The machine is required to mechanically scrub the inside and outside surfaces (including the inner and outer bottoms) of standard 40 L milk cans. 2.0 DESIGN REQUIREMENTS 2.1 Dimension of can: Dimensions of cans are as below: Diameter of body : 352mm Diameter of neck : 595mm 2.2 Loading/Unloading: Manual 2.3 General Design: Immersion bath with nylon brushes. 2.4 Finish : All welding joints are to be smooth ground smooth. All the surfaces are to be polished to 150 grits. 3.0 SCOPE OF SUPPLY: 3.1 The Bath : It will be a robust construction fabricated from 2mm thk stainless steel confirming to AISI 304 G with rigidly formed top edge. Holding capacity of the bath shall be around 425 L. - 1 No. 3.2 Drive: This will be securely mounted at one end of the bath with water tight removable cover. The brush drive shaft will extend through end wall and be fitted with seal to prevent ingress of waster from the bath to the drive unit. The bearings will be protected from moisture – ingress and have sufficient greasing points. DRIVING SYSTEM TO BE COMPLETE WITH ELECTRIC MOTOR 1 HP, 1440 RPM, 3 PHASE, TEFC, Degree of protection IP 55, Gear Box & driving chain. – 1 Set. 3.3 Accessories of Both : Nylon Brushes, Over flow and drain, Rollers, Frame and Legs.